步驟1.開始LinMot Designer,並編輯整體設定
開啟LinMot Designer後,先開啟一個新專案(New File)
然後編輯整體設定(Edit Global Settings)
![](https://montrol.com.tw/wp-content/uploads/2011/07/01-2.jpg)
出現一個Motor Selection的畫面,這邊我們可以先輸入我們需求的最大行程(Stroke)
以及最大推力(Force),下面就會列出符合的馬達,
點選想要的馬達後,按OK進行下一步
![](https://montrol.com.tw/wp-content/uploads/2011/07/02-4.jpg)
然後會到”Global Settings”的視窗,先在Motor的設定標籤頁
![](https://montrol.com.tw/wp-content/uploads/2011/07/03-1-2.jpg)
最上面的部分設定:
Number of Motors:馬達數量
Cooling Method:冷卻方式
Slider Mounting:
![](https://montrol.com.tw/wp-content/uploads/2011/07/03-1-1.jpg)
![](https://montrol.com.tw/wp-content/uploads/2011/07/03-2.jpg)
![](https://montrol.com.tw/wp-content/uploads/2011/07/03-3.jpg)
![](https://montrol.com.tw/wp-content/uploads/2011/07/04-2.jpg)
![](https://montrol.com.tw/wp-content/uploads/2011/07/05-1-2.jpg)
![](https://montrol.com.tw/wp-content/uploads/2011/07/05-1-1.jpg)
![](https://montrol.com.tw/wp-content/uploads/2011/07/06-1-1.jpg)
![](https://montrol.com.tw/wp-content/uploads/2011/07/07-1.jpg)